METER-BT
Non intrusive system application is now preferred in the level measurements field. For this reason the SGM-LEKTRA developed the METER unity to best meet the "GENERAL-PURPOSE" application requests. The METER unit offers, together with its compact size, a complete versions range that makes the METER very versatile for the most varied applications, including areas with explosion hazard and chemically aggressive environments. METER is an ultrasonic level transmitter, temperature-compensated and suitable for connection with MODBUS RTUacquisition systems. METER is a compact unit which in addition to an analog output includes two freely addressable relay.ANDROID App for remote reading and configuration via BLUETOOTH? (max. distance:15mt).
· ANDROID App for remote reading and configuration via BLUETOOTH?
· Contactless level measurements
· Suitable for liquids and granulates level measurement
· Integrated digital temperature sensor to compensate the measure
· Powe Supply 24Vdc
· Protection: IP67 / IP68 (sensor)
· Output: 1 4÷20mA analog output
2 relays output
· MODBUS RTU com. protocol
Non intrusive system application is now preferred in the level measurements field. For this reason the SGM-LEKTRA developed the METER unity to best meet the "GENERAL-PURPOSE" application requests. The METER unit offers, together with its compact size, a complete versions range that makes the METER very versatile for the most varied applications, including areas with explosion hazard and chemically aggressive environments. METER is an ultrasonic level transmitter, temperature-compensated and suitable for connection with MODBUS RTUacquisition systems. METER is a compact unit which in addition to an analog output includes two freely addressable relay.ANDROID App for remote reading and configuration via BLUETOOTH? (max. distance:15mt).
· ANDROID App for remote reading and configuration via BLUETOOTH?
· Contactless level measurements
· Suitable for liquids and granulates level measurement
· Integrated digital temperature sensor to compensate the measure
· Powe Supply 24Vdc
· Protection: IP67 / IP68 (sensor)
· Output: 1 4÷20mA analog output
2 relays output
· MODBUS RTU com. protocol
| Housing material |
PC or Al / PP wetted part (PVDF for ATEX certified vers.) |
| Mechanical installation |
2”GAS M (PP flange DN50 or DN 80 opt.) |
| Protection degree |
IP67 / IP68 (sensor) |
| Electrical connection | Internal push connectors |
| Working temperature | -30 ÷ +70°C; +80°C non-continuous; -20 ° to +60 ° C for ATEX certified versions |
|
Pressure |
from 0,5 to 1,5 bar (absolute) |
|
Power supply |
2-wire: 20÷30 Vdc / 4-wire: 24Vdc |
| Power consumption |
2-wire max 0,6W / 4-wire max 1,5W |
| Analog output |
4÷20mA, max 750ohm (4-wire) |
| Relays output |
(4-wire only) n°2 3A 230Vac (n.o.) |
| Digital communication |
MUDBUS RTU for 4-wire versions; (opt.) HART for 2-wire versions |
| Max measure range |
max 0.25÷6m; max 0.40÷10m [In case of non perfectly reflecting surfaces, the maximu distance value will be reduced]
|
| Blind distance |
0,25m (5m vers.) / 0,40m (8m vers.) |
| Temperature compensation |
digital from -30 to 80°C |
|
Accuracy |
±0,5% (of the measured distance) not better than ±3mm |
|
Resolution |
1mm |
|
Calibration |
via ANDROID App or 4 buttons or via HART/MODBUS RTU |
| Warm-up |
5 minutes typical |
| LCD Display |
Plug-in display/keyboard 4 buttons matrix LCD |
|
Ex-proof |
ATEX II 1/2G Ex ia II C T6 |
|
VL601 |
Display/keypad module (VL601SGM code) for rapid and/or advanced programming of all the METER transmitters |
 |
|
VLW601 |
適合與安裝在很難接觸到區域的液位/流量傳感器一起使用。VLW601 非常適合遠程顯示，與 PTU05.0/05./05.6, MTU5, METER4x4x 或 METER8x4x (4-線) 和 FLOWMETER一起使用 連接PTU05.0/05./05.6, MTU5(24Vdc) (4線制) 和FLOWMETER 明渠流量計 防護等級IP66 24Vdc, 24/115/230Vac 供電 VLW601 (24Vdc max.1,5W) a÷20mA輸出 |
 |
|
MUX |
Multiplexer adatti alla gestione e controllo da 1 a 8 sonde termometriche digitali mono o multipunto, max. 12, tipo TT Connessione elettrica al multiplexer delle sonde termometriche digitali mono o multipunto tipo TT sempre tramite cavo schermato a 3 conduttori ,configurazione multiplexer tramite 3 tasti a bordo. Visualizzazione su display a bordo multiplexer della configurazione e delle singole temperature rilevate. Connessione elettrica tra multiplexer e unità di visualizzazione e controllo tramite cavo bipolare schermato, tipo AWG22, per comunicazione dati digitali in rete seriale RS485 Fino a max. 63 multiplexer collegabili in rete seriale Multiplexer perfettamente compatibile con i sistemi di rilevamento, controllo e visualizzazione temperature SGM LEKTRA già in opera tipo: MUXA/B/C/D; AGRITHERM10; AGRITHERM20; AGRITHERM40 |
 |
|
MOUNTING SYSTEM FOR ULTRASONICS |
Wide range of accessories for units VLW90M, METER, FLOWMETER ,SGM-101F mounting and their matched sensors. The mounting system is modular and is made entirely of 304. |
 |
